Optical Flow TOF Ground Station

CV50/CV0850/CV08Ground Station for Protocol Conversion of Optical Flow TOF Ranging Modules 

Step 1: USB-to-TTL cable—connect to the computer first
Step 2: Open the host computer software
Step 3: Select the correct serial port and click the “Open” button
Step 4: A message will appear indicating that the serial port has been successfully opened
Step 5: Connect the optical flow/laser module according to the serial port pinout
Note: Do not reverse the GND and VCC connections. TX and RX must be connected as shown; do not reverse them. Please refer to the interface definitions in the product specifications. If data is visible after connecting the module, the connection is normal.
Note: You must open the host software’s serial port before powering on the module. If there is no response, you may unplug and replug the module, but do not disconnect the USB cable.